YKK #10 Marine Boat Top Zippers, Outdoor Canvas Many Sizes & Colors, Heavy Duty

Description

Marine (UV Rated “sun protection”) Heavy Duty Boat Top Zipper YKK #10 Separating Zipper with
Double Pull
Automatic Locking
Metal Slider
(inside & outside pull/tab)
YKK….LITTLE PARTS…..BIG DIFFERENCE….
Used in Marine, Auto, Boat, Tent, Recreation, Coats, Jackets, Snow Pants, and many many more uses.
They are
made in the
USA,
by YKK and UV Rated for the sunshine. A strong, top quality zipper!
Color
choices are: White, Black and Beige…
Size
— #10 Teeth measure approximately 5/16″ inches wide when zipped together. Opening for slider is approximately 3/8″ or 10mm (#10). The total width of the zipper, with the tape, when zipped together is about 1& 1/2 inches wide.
Teeth
are made from Delrin.  Delrin is a lightweight, low-friction, and wear-resistant plastic, made by DuPont.
Separating Zipper
— separates at one end. Like a Coat or Jacket would, or like a side curtain on a boat that could be taken off.
Automatic Lock
— won’t come unzipped where you stop zipping, middle or the end.
Double Pull Metal Slider
— they are
corrosion resistant and
stronger than the Plastic ones that break over time. There is one Slider, one each zipper, and
2 pulls, (handles/tabs) (inside and outside) that you can zip from either side. Not 2 sliders.
The Zipper Colors are BLACK, WHITE or BEIGE.
If you need Pull Cords and Zipper Top Stops:
Pull Cords
match the zipper colors; they are Black, White, and Beige….10 in a package. Pull cords will be sent with your zipper purchase. Use first drop down select 10 pull cords, (at the bottom) then 2nd dropdown for the selecting color.
Zipper Top Stops
are Stainless Steel… 10 in a package.  Stops will be sent with your zipper purchase. Use first drop down menu choose 10 zipper top stops, (at the bottom) then use the second drop down menu select Stainless.
Lengths
…6″, 12″, 16″, 18″, 20″, 21″, 24″, 30″, 34″, 36″, 40″, 42″, 46″, 48″, 54″, 60″, 66″, 68″, 72″, 78″, 80″, 84″, 90″, 96″, 108″, 110″, 120″, 132, 144″, 180″, 240″.
Techy info about the zippers::
Vislon
Separating zippers are extremely strong and lightweight and differ from conventional zippers, because the teeth are made from Delrin and the tape is polyester. Because of the unique properties of the Vislon zipper, it has a wide variety of industrial, consumer and military applications where environmental conditions reduce the effectiveness of metal zippers. The vislon zipper is corrosion resistant. The zipper is self lubricating and operates smoothly despite mud, sand, etc. The color is an integral part of the molding material, creating a finish that does not rub off, peel or chip. Has excellent resistance to heat (up o 360 degrees F) and cold to 60 degrees F below 0). Melts at 480 degrees F. Resistance to chemicals further extends the use for the Vislon Zipper beyond the scope of conventional metal zippers.